REACTIVE EXTRACTION PROCESS FOR CONCENTRATING CITRIC ACID USING AN ELECTROLYTE MIXED SOLVENT (14)
R.T.P. Pinto, L. Lintomen, M.I. Broglio, L.F.L. Luz Jr., A.J.A. Meirelles and M.R. Wolf-Maciel (Brazil)

PLANNING AND SCHEDULING THE VALUE-ADDED CHAIN (31)
M. Badell, M. Aguer, G. Santos and L. Puigjaner (Spain)

A SOFTWARE TOOLBOX FOR DATA ANALYSIS AND REGRESSION, CONSIDERING DATA PRECISION AND NUMERICAL ERROR PROPAGATION (38)
Neima Brauner and Mordechai Shacham (Israel)

COMPARISON OF THREE SCHEDULING METHODS FOR A BATCH PROCESS WITH A RECYCLE (40)
J. Heinonen and F. Pettersson (Finland)

A SIMULATION TOOL FOR THE WOOD DRYING PROCESS (44)
Helge Didriksen and Jan Sandvig Nielsen (Denmark)

CLUSTER IDENTIFICATION USING A PARALLEL CO-ORDINATE SYSTEM FOR KNOWLEDGE DISCOVERY AND NONLINEAR OPTIMIZATION (51)
K. Wang, A. Salhi and E.S. Fraga (United Kingdom)

CONTROL OF THE ROTARY CALCINER FOR SODA ASH PRODUCTION (53)
V.M. Cristea and P.S. Agachi (Romania)

MINING TEXTUAL PROJECT DOCUMENTATION IN PROCESS ENGINEERING (54)
A. Becks and J.-C. Toebermann (Germany)

THE EFFECT OF MODEL FIDELITY ON REAL-TIME OPTIMIZATION PERFORMANCE (63)
W.S. Yip and T.E. Marlin (Canada)

A MIXED INTEGER PROGRAMMING APPROACH FOR SCHEDULING COMMODITIES IN A PIPELINE (70)
L. Magatão, L.V.R. Arruda and F. Neves Jr. (Brazil)

MODELLING THE LIQUEFIED PETROLEUM GAS STORAGE AND DISTRIBUTION (72)
S.L. Stebel, F. Neves Jr., L.V.R. Arruda, J.A. Fabro and L.C.A. Rodrigues (Brazil)

EVALUATION OF ANTI-SURGE CONTROL CONCEPTS DURING ESD SIMULATION OF DYNAMIC PROCESS BEHAVIOUR WITH PULSIM (78)
O. van Wolfswinkel and J.P.M. Smeulers (The Netherlands)

OPTIMAL OPERATION OF FED-BATCH SUGAR CRYSTALLISATION WITH RECYCLE (81)
Ben H.L.Betlem, Sander van Rosmalen, Peter B. Thonus and Brian Roffel (The Netherlands)

DYNAMIC OPTIMISATION OF BATCH DISTILLATION WITH A MIDDLE VESSEL USING NEURAL NETWORK TECHNIQUES (101)
M.A. Greaves and I.M. Mujtaba (United Kingdom), M. Barolo and A. Trotta (Italy), M.A. Hussain (Malaysia)

PROCESS CONTROL SCHEME FOR A 2-BED-PRESSURE SWING ADSORPTION PLANT (114)
M. Bitzer and M. Zeitz (Germany)

OPTIMUM CONTROLLABILITY OF DISTRIBUTED SYSTEMS BASED ON NON-EQUILIBRIUM THERMODYNAMICS (115)
F. Michiel Meeuse and Johan Grievink (The Netherlands)

A GENERAL FRAMEWORK FOR THE SYNTHESIS AND OPERATIONAL DESIGN OF BATCH PROCESSES (120)
Irene Papaeconomou, Rafiqul Gani and Sten Bay Jørgensen (Denmark)

AN OPTIMIZED STRATEGY FOR EQUATION-ORIENTED GLOBAL OPTIMIZATION (122)
Ricardo M. Lima and Romualdo L. Salcedo (Portugal)

PROCESS SIMPLIFICATION ASKS FOR A YARDSTICK, QUANTIFICATION OF PLANT COMPLEXITY (123)
J.L.A. Koolen (The Netherlands)

OPERATION DECISION SUPPORT SYSTEM USING PLANT DESIGN INFORMATION (128)
Yukiyasu Shimada, Hossam A. Gabbar and Kazuhiko Suzuki (Japan)

COMPUTER-AIDED DESIGN OF REDUNDANT SENSOR NETWORKS (131)
Georges Heyen, Marie-Noëlle Dumont and Boris Kalitventzeff (Belgium)

HYBRID MODELLING AND SIMULATION OF PIPELESS BATCH PLANTS (140)
R.R.H. Schiffelers, D.A. van Beek, J. Meuldijk and J.E. Rooda (The Netherlands)

FLATNESS-BASED OPTIMIZATION OF BATCH PROCESSES (142)
M.E. van Wissen and J. Grievink (The Netherlands), S.Palanki (United States of America)

INTERVAL ANALYSIS FOR IDENTIFICATION AND BOUNDING OF POTENTIAL PROCESS STRUCTURES IN EARLY DESIGN (145)
A.R.F O'Grady, I.D.L Bogle and E.S. Fraga (United Kingdom)

ANALYSIS OF PARAMETRIC SENSIBILITY OF THE PROCESS OF PRODUCTION OF CYCLOHEXANOL (148)
M.M. Santos and R. Maciel Filho (Brazil)

OPTIMAL DESIGN OF GAS PERMEATION MEMBRANE & MEMBRANE ADSORPTION HYBRID SYSTEMS (151)
Ramagopal Uppaluri, Robin Smith, Patrick Linke and Antonis Kokossis (United Kingdom)

DEVELOPMENT OF AN INTERNET-BASED PROCESS CONTROL SYSTEM (153)
S.H. Yang, X. Chen, D.W. Edwards and J.L. Alty (United Kingdom)

SHORT-TERM SCHEDULING OF A POLYMER COMPOUNDING PLANT (156)
P. Castro, A.P.F.D. Barbosa-Póvoa? and H. Matos (Portugal)

AUTOMATIC INTEGRATION OF HIGH-INDEX DYNAMIC SYSTEMS (157)
E.F. Costa Jr., A.R. Secchi and E.C. Biscaia Jr. (Brazil)

A FRAMEWORK FOR CONSISTENCY ANALYSIS OF SAFETY PROPERTIES AND ITS USE IN THE SYNTHESIS OF DISCRETE-EVENT CONTROLLERS FOR PROCESSES SYSTEMS (158)
A. Sanchez, R. Gonzalez and A. Michel (Mexico)

DYNAMIC TRAJECTORY OPTIMIZATION BETWEEN UNSTABLE STEADY-STATES OF A CLASS OF CSTRS (164)
Andrea Silva B., Antonio Flores T. and Juan Jose Arrieta C. (Mexico)

DEVELOPMENT OF DYNAMIC MODELS FOR FIXED BED CATALYTIC REACTORS (166)
E.C. Vasco de Toledo, E.R. de Morais and R. Maciel Filho (Brazil)

AN INTEGRATED DYNAMIC MODELLING AND SIMULATION SYSTEM FOR ANALYSIS OF PARTICULATE PROCESSES (167)
Nicoleta Balliu, Ian Cameron and Robert Newell (Australia)

SUPPLY CHAIN OPTIMIZATION INVOLVING LONG-TERM DECISION-MAKING (168)
Jehoon Song, Jin-Kwang Bok, Hyungjin Park and Sunwon Park (Korea)

THE EFFECT OF MODELLING ASSUMPTIONS ON THE DIFFERENTIAL INDEX OF LUMPED PROCESS MODELS (169)
Zs. Tuza, G. Szederkényi and K.M. Hangos (Hungary)

SYNTHESIS OF THERMODYNAMICALLY EFFICIENT DISTILLATION SCHEMES FOR MULTICOMPONENT SEPARATIONS (170)
Ben-Guang Rong and Andrzej Kraslawski (Finland)

MINLP RETROFIT OF HEAT EXCHANGER NETWORKS COMPRISING DIFFERENT EXCHANGER TYPES (173)
Aleksander Soršak and Zdravko Kravanja (Slovenia)

MODELLING OF MULTICOMPONENT REACTIVE ABSORPTION USING CONTINUUM MECHANICS (178)
D. Roquet, P. Cézac and M. Roques (France)

REPRESENTING RECIPES AND PROCEDURES WITH PSL (179)
Rafael Batres, Atsushi Aoyama and Yuji Naka (Japan)

COMPARISON OF DIFFERENT MATHEMATICAL PROGRAMMING TECHNIQUES FOR MASS EXCHANGE NETWORK SYNTHESIS (180)
Z. Szitkai, E. Rev, Z. Lelkes and Z. Fonyo (Hungary), A.K. Msiza and D.M. Fraser (South Africa)

EQUATION BASED SPYRO® MODEL AND OPTIMISER FOR THE MODELLING OF THE STEAM CRACKING PROCESS (186)
Marco W.M. van Goethem, Florian I. Kleinendorst and Nils van Velzen (The Netherlands), Mario Dente and Eliseo Ranzi (Italy)

INTERNET-BASED EQUIPMENT AND MODEL GALLERY (187)
Marja Nappa, Tommi Karhela and Markku Hurme (Finland)

SYNTHESIS OF AZEOTROPIC SEPARATION SYSTEMS BY CASE-BASED REASONING (190)
Timo Seuranen, Elina Pajula and Markku Hurme (Finland)

DESIGNING A MULTI-USER WEB-BASED DISTRIBUTED SIMULATOR FOR PROCESS CONTROL eLEARNING (191)
S.H. Yang and J.L. Alty (United Kingdom)

FEASIBILITY OF EQUILIBRIUM-CONTROLLED REACTIVE DISTILLATION PROCESSES: APPLICATION OF RESIDUE CURVE MAPPING (195)
C.P. Almeida-Rivera and Johan Grievink (The Netherlands)

MINIMIZATION OF THE ENTROPY PRODUCTION IN THE PRIMARY STEAM REFORMER (201)
Lars Nummedal, Audun Røsjorde, Eivind Johannessen and Signe Kjelstrup (Norway)

COMPUTER AIDED NEURO-FUZZY CONTROL IN ANODIZING OF ALUMINIUM (202)
A.F. Batzias and F.A. Batzias (Greece)

APPLICATION OF TRANSPORT EQUATIONS FOR HEAT AND MASS TRANSFER TO DISTILLATION OF ETHANOL AND WATER (206)
Gelein M. de Koeijer and Signe Kjelstrup (Norway)

A NEW ALGORITHM FOR DEVELOPING DYNAMIC RADIAL BASIS FUNCTION NEURAL NETWORK MODELS BASED ON GENETIC ALGORITHMS (209)
Haralambos Sarimveis, Alex Alexandridis, Stefanos Mazarakis and George Bafas (Greece)

INCORPORATION OF SUSTAINABILITY DEMANDS INTO THE CONCEPTUAL PROCESS DESIGN PHASE OF CHEMICAL PLANTS (219)
Gijsbert Korevaar, G.Jan Harmsen and Saul M. Lemkowitz (The Netherlands)

DYNAMIC SIMULATION OF CONTINUOUS CRYSTALLIZERS BY MOVING FINITE ELEMENTS WITH PIECEWISE POLYNOMIALS (221)
Zsolt Ulbert and Bela G. Lakatos (Hungary)

MODEL TRANSFORMATIONS IN MULTI SCALE MODELLING (222)
S. McGahey and I. Cameron (Australia)

ENZYME CONFORMATIONAL PREDICTIONS BY MOLECULAR MODELING (225)
S.S. Jesus, T.T. Franco, R. Maciel Filho, F.N. Shimono, R.R. Sousa, A. Cappi and G.C. Stein (Brazil)

MULTILEVEL DYNAMICAL MODELS FOR POLYDISPERSE SYSTEMS: A VOLUME AVERAGING APPROACH (235)
Béla G. Lakatos (Hungary)

NON LINEAR DYNAMICS OF A NETWORK OF REACTORS WITH PERIODICAL FEED SWITCHING (236)
L. Russo, E. Mancusi, P.L. Maffettone and S. Crescitelli (Italy)

CYCLIC PRODUCTION AND CLEANING SCHEDULING OF MULTIPRODUCT CONTINUOUS PLANTS (253)
Alessandro Alle and Jose M. Pinto (Brazil), Lazaros G. Papageorgiou (United Kingdom)

SIMULTANEOUS SYNTHESIS AND DESIGN OF NOVEL CHEMICALS AND CHEMICAL PROCESS FLOWSHEETS (300)
Patrick Linke and Antonis Kokossis (United Kingdom)

SAFE PROCESS PLANT LAYOUT USING MATHEMATICAL PROGRAMMING (208)
Dimitrios I. Patsiatzis and Lazaros G. Papageorgiou (United Kingdom)

FREQUENCY LOCKING IN A DISCONTINUOUS PERIODICALLY FORCED REACTOR (237)
E. Mancusi, L. Russo, G. Continillo and S. Crescitelli (Italy)

A GENERALISED PROGRAM FOR FUEL CELL SYSTEMS SIMULATION (239)
S. Pierucci, D. Manca, S. Galli and M. Mangione (Italy)

A SCHEME FOR WHOLE TEMPERATURE PROFILE CONTROL IN DISTRIBUTED PARAMETER SYSTEMS (240)
T. Wahl, W.E. Jones and J.A. Wilson (United Kingdom)

NON-LINEAR BEHAVIOUR OF PFR-SEPARATOR-RECYCLE POLYMERIZATION SYSTEMS (246)
Anton A. Kiss, Costin S. Bildea, Alexandre C. Dimian and Piet D. Iedema (The Netherlands)

EXPERIMENTAL STUDY AND ADVANCES IN 3-D SIMULATION OF GAS FLOW IN A CYCLONE USING CFD (247)
A.P. Peres, H.F. Meier, W.K. Huziwara and M. Mori (Brazil)

FRESH WATER BY REVERSE OSMOSIS BASED DESALINATION PROCESS: OPTIMISATION OF DESIGN AND OPERATING PARAMETERS (249)
A. Villafafila (Spain) and I.M. Mujtaba (United Kingdom)

OPTIMIZATION OF NAPHTHA FEEDSTOCK BLENDING FOR INTEGRATED OLEFINS-AROMATICS PLANT PRODUCTION SCHEDULING (256)
Y. Ota, K. Namatame, H. Hamataka, K. Nakagawa and H. Abe (Japan), A. Cervantes, I.B. Tjoa and F. Valli (United States of America)

DYNAMIC MODELING OF CATALYTIC HYDROGENATION OF PYROLYSIS GASOLINE IN TRICKLE-BED REACTOR (257)
A. Arpornwichanop and P. Kittisupakorn (Thailand), I.M. Mujtaba (United Kingdom)

REAL TIME BATCH PROCESS OPTIMIZATION WITHIN THE ENVIRONMENT OF THE FLEXIBLE RECIPE (264)
Javier Romero, Antonio Espuña and Luis Puigjaner (Spain)

APPLICATION OF CFD ON A CATALYTIC ROTATING BASKET REACTOR (265)
J. Warna, M. Ronnholm, T. Salmi and K. Keikko (Finland)

SCHEDULING OF CONTINUOUS PROCESSES USING CONSTRAINT-BASED SEARCH: AN APPLICATION TO BRANCH AND BOUND (276)
L.C.A. Rodrigues, R. Carnieri and F. Neves Jr. (Brazil)

MODELING AND OPTIMIZATION OF A SUGAR PLANT USING HYBRID BATCH MODEL PREDICTIVE CONTROL (293)
Michiel E. van Wissen, Joost F.C. Smeets, Ad Muller and Peter J.T. Verheijen (The Netherlands)

AN OBJECT-ORIENTED FRAMEWORK FOR BILL OF MATERIALS IN PROCESS INDUSTRIES (294)
Marcela Vegetti, Gabriela Henning and Horacio Leone (Argentina)

OPTIMISATION OF OILFIELD DEVELOPMENT PRODUCTION CAPACITY (301)
Richard J. Barnes, Patrick Linke and Antonis Kokossis (United Kingdom)

SELECTION OF INTERNALS FOR REACTIVE DISTILLATION COLUMN - CASE-BASED REASONING APPROACH (305)
Yuri Avramenko, Lars Nyström and Andrzej Kraslawski (Finland)

A MULTI-CELLULAR DISTRIBUTED MODEL FOR NITRIC OXIDE TRANSPORT IN THE BLOOD (308)
Nael H. El-Farra, Panagiotis D. Christofides and James C. Liao (United States of America)

DYNAMIC OPTIMIZATION OF DISSIPATIVE PDE SYSTEMS USING APPROXIMATE INERTIAL MANIFOLDS (311)
Antonios Armaou and Panagiotis D. Christofides (United States of America)

COORDINATED FEEDBACK AND SWITCHING FOR ROBUST CONTROL OF HYBRID NONLINEAR PROCESSES (313)
Nael H. El-Farra and Panagiotis D. Christofides (United States of America)

MIXED INTEGER OPTIMIZATION MODELS FOR THE SYNTHESIS OF PROTEIN PURIFICATION PROCESSES WITH PRODUCT LOSS (315)
Elsa Vasquez-Alvarez and Jose M. Pinto (Brazil)

MULTI-SITE UTILITY INTEGRATION - AN INDUSTRIAL CASE STUDY (325)
Kentaro Hirata and Haruo Sakamoto (Japan), Lionel O'Young (United States of America), Kwok-Yuen Cheung and Chi-Wai Hui (Hong Kong)

DESIGN OF A MEMBRANE PROCESS IN A COUNTERCURRENT OPERATION FOR THE TREATMENT OF INDUSTRIAL EFFLUENTS (331)
Sergio M. Corvalán and Ana M. Eliceche (Argentina), Inmaculada Ortiz (Spain)

A CONCURRENT ENGINEERING APPROACH FOR AN EFFECTIVE PROCESS DESIGN SUPPORT SYSTEM (337)
Solomon S. Gelete, René Bañares-Alcántara and Laureano Jiménez (Spain)

A NOVEL COURSE ON INTEGRATED BATCH-PLANT MANAGEMENT (342)
Zofia Verwater-Lukszo and Petra Heijnen (The Netherlands)

A SUPPORTING TOOL FOR IMPROVEMENT OF BATCH MANUFACTURING (343)
Petra Heijnen and Zofia Verwater-Lukszo (The Netherlands)

AN UNCONSTRAINED APPROACH FOR INSTRUMENTATION NETWORK DESIGN AND UPGRADE (345)
Miguel Bagajewicz (United States of America)

HYBRID MODELLING: ARCHITECTURE FOR THE SOLUTION OF COMPLEX PROCESS SYSTEMS (349)
Ali Abbas, Victor Guevara and Jose Romagnoli (Australia)

MULTIOBJECTIVE DYNAMIC OPTIMIZATION OF SEMI-CONTINUOUS PROCESSES (351)
C.M. Silva and E.C. Biscaia Jr. (Brazil)

AN INTEGRATED FRAMEWORK FOR MULTI-OBJECTIVE OPTIMISATION IN PROCESS SYNTHESIS AND DESIGN (355)
H. Alhammadi, G.W. Barton, J.A. Romagnoli and B. Alexander (Australia)

MODELING WORK PROCESSES IN CHEMICAL ENGINEERING - FROM RECORDING TO SUPPORTING (357)
M. Eggersmann, R. Schneider and W. Marquardt (Germany)

A TWO-LEVEL STRATEGY OF INTEGRATED DYNAMIC OPTIMIZATION AND CONTROL OF INDUSTRIAL PROCESSES - A CASE STUDY (361)
J. V. Kadam, M. Schlegel and W. Marquardt (Germany), R.L. Tousain, D.H. van Hessem, J. van den Berg and O. H. Bosgra (The Netherlands)

A SUCCESSIVE MIXED INTEGER LINEAR PROGRAMMING APPROACH TO THE GRADE CHANGE OPTIMIZATION PROBLEM FOR CONTINUOUS CHEMICAL PROCESSES (363)
Rob Tousain and Okko Bosgra (The Netherlands)

MODELING COUPLED DISTILLATION COLUMN SECTIONS USING PROFILE MAPS (367)
S.T. Holland, M. Tapp, D. Hildebrandt and D. Glasser (South Africa)

COMPUTER DESIGN OF A NEW PREDICTIVE ADAPTIVE CONTROLLER COUPLING NEURAL NETWORKS AND KALMAN FILTER APPLIED TO SISO AND MIMO CONTROL (370)
L. Ender, R. Scheffer and R. Maciel Filho (Brazil)

AN MILP FRAMEWORK FOR SHORT-TERM SCHEDULING OF SINGLE-STAGE BATCH PLANTS WITH LIMITED DISCRETE RESOURCES (379)
Carlos A. Méndez and Jaime Cerdá (Argentina)

MIXED-LOGIC DYNAMIC OPTIMIZATION APPLIED TO CONFIGURATION AND SEQUENCING OF BATCH DISTILLATION PROCESSES (380)
J. Oldenburg, W. Marquardt, D. Heinz and D. Leineweber (Germany)

DESIGN OF A REACTIVE DISTILLATION PROCESS FOR ULTRA-LOW SULFUR DIESEL PRODUCTION (383)
Eduardo S. Perez-Cisneros, Salvador A. Granados-Aguilar, Pedro Huitzil-Melendez and Tomas Viveros-Garcia (Mexico)

A SYSTEMATIC APPROACH FOR THE OPTIMAL OPERATION AND MAINTENANCE OF HEAT EXCHANGER NETWORKS (387)
Hernán Rodera and Hiren K. Shethna (Canada)

A MILP APPROACH TO THE OPTIMIZATION OF THE OPERATION POLICY OF AN EMULSIFICATION PROCESS (391)
M. Stork, R.L. Tousain and O.H. Bosgra (The Netherlands)

RESTRUCTURING THE KEYWORDS INTERFACE TO ENHANCE CAPE KNOWLEDGE ACQUISITION VIA AN INTELLIGENT AGENT (394)
F.A. Batzias and E.C. Marcoulaki (Greece)

A GLOBAL OPTIMIZATION TECHNIQUE FOR SOLID-LIQUID EQUILIBRIUM CALCULATIONS: APPLICATION TO CALCIUM PHOSPHATE PRECIPITATION (395)
L. Montastruc, C. Azzaro-Pantel, B. Biscans, A. Davin, L. Pibouleau and S. Domenech (France)

MPC CONTROL OF A PREDENITRIFICATION PLANT USING LINEAR SUBSPACE MODELS (398)
Oscar A. Z. Sotomayor, Song W. Park and Claudio Garcia (Brazil)

DESIGNING MULTICOMPONENT DISTILLATION COLUMNS BASED ON GEOMETRIC PINCH ANALYSIS (404)
Frank Z. Hu, Stanislaw K. Wasylkiewicz and Hiren K. Shethna (Canada)

CONTROL AND DYNAMICS OF A DISTILLATION COLUMN WITH HEAT PUMP (406)
Gorazd Sobočan and Peter Glavič (Slovenia), Marius Govatsmark and Sigurd Skogestad (Norway)

INTEGRATION OF REACTION AND SEPARATION IN A BATCH EXTRACTIVE DISTILLATION COLUMN WITH A MIDDLE VESSEL (407)
José Espinosa (Argentina)

APPLICATION OF HYBRID MODELS IN CHEMICAL INDUSTRY (414)
G. Mogk, Th. Mrziglod and A. Schuppert (Germany)

CATALYTIC DISTILLATION MODELING (415)
Florence Druart, David Rouzineau, Jean-Michel Reneaume and Michel Meyer (France)

A MIXED INTEGER OPTIMIZATION STRATEGY FOR INTEGRATED GAS/OIL PRODUCTION (420)
V.D. Kosmidis, J.D. Perkins and E.N. Pistikopoulos (United Kingdom)

BAYESIAN PARAMETER ESTIMATION IN BATCH POLYMERISATION (432)
Zhen Lu, Elaine Martin and Julian Morris (United Kingdom)

TRILINEAR MODELS FOR BATCH MSPC: APPLICATION TO AN INDUSTRIAL BATCH PHARMACEUTICAL PROCESS (435)
J.A. Lopes and J.C. Menezes (Portugal)

OPTIMISATION OF A METHYL ACETATE PRODUCTION PROCESS BY REACTIVE BATCH DISTILLATION (442)
S. Elgue, L. Prat, M. Cabassud, J.M. Le Lann and J. Cézerac (France)

SMART ENTERPRISE FOR PULP & PAPER MILLS: DATA PROCESSING AND RECONCILIATION (443)
M. Sánchez (Argentina), D. Leung, H. Konecsny, C. Bigaran and J.A. Romagnoli (Australia)

MINLP HEAT EXCHANGER NETWORK DESIGN INCORPORATING PRESSURE DROP EFFECTS (444)
S. Frausto-Hernández, V. Rico-Ramírez, S. Hernández-Castro and A. Jiménez (Mexico)

HYDRODESULPHURIZATION OF GASOILS: ADVANTAGES OF COUNTER- CURRENT GAS-LIQUID CONTACTING (452)
J.A. Ojeda and J. Ramirez (Mexico), R. Krishna (The Netherlands)

MULTI-SCALE MODELING STRATEGY FOR SEPARATION OF ALKANE MIXTURES USING ZEOLITES (454)
R. Krishna (The Netherlands)

BIOCHEMICAL REACTION PATHWAY ANALYSIS USING PETRI NET (462)
N. Balasubramanian and Chuei-Tin Chang (Taiwan)

HIERARCHICAL APPROACH FOR SELECTING UNCERTAIN PARAMETERS AT THE CONCEPTUAL STAGE OF DESIGN (463)
H.D. Goel, P.M. Herder, M.P.C. Weijnen and J. Grievink (The Netherlands)

PERFORMANCE MONITORING FOR PROCESS CONTROL AND OPTIMISATION (468)
Arnaud Nougues, Pierre Vadnais and Rob Snoeren (The Netherlands)